 |
SYSTEMS FOR FACADES – BLINDS WITH STEEL CABLES |
|
 |
| Type of application: |
| Vertical |
| Installation: |
| Outdoor |
| Wind resistance: |
| Class 3 |
|
Product marked:
 |
|
Vertical roller blind with steel cable guides designed principally for installation outdoors on building façades. A choice of blind systems available, with or without cover boxes, with stainless steel cables and fork swage turnbuckles for face or floor mounting.
Available in manual (crank) or motorised versions.
|
|
 |
 |
 |
| A0GL170 |
M0GL178 |
ACGL170 |
 |
 |
|
| MCGL 150/506/507 |
MCGL150/506/507 CT110 |
|
The aluminium structure is available in the following standard colours: anodised silver, black, bronze or powder enamelled RAL 9010 (white) and consists of:
- Stainless steel mounting brackets or a choice of extruded aluminium cover boxes, models C83/C103/CT103/CT110 or CV140
- Diameter 3 or 4mm stainless steel cable AISI 316, complete with stainless steel fork swage turnbuckle and accessories
- Round extruded aluminium bottom rail, diameter 35 or 42 mm , adequately weighted with a zinc plated iron bar and Delrin end caps for use with the cable guides
- Roller tube : 1.25 mm thick galvanised steel tube Ø 70 (crank) or Ø 78 mm (motorised) with slot for mounting fabric
- Motorised version : Tubular single phase motor - 230 V 50 Hz, adjustable limit switch and thermal cut-out with level IP44 protection
Manual version: Crank operated, type TS - gear ratio 1:11
OPTIONAL:
- Remote control, electronic control units for multi-level automation, sun/wind sensors
- Manual (crank) or motorised (230V-50Hz) versions
- With or without cover box
- Face or ceiling/floor mounting (depending upon model chosen)
ADVANTAGES:
- Elegant and highly technical roller blinds with excellent wind resistance
- Wide choice of fixtures suitable for any architectural structure
|
|
 |
L 450 x H 400 cm max
depending upon model |
|
Box
Side channels
Motorised or manual operation |
|
| References for this product family: |
|
|
|
