• Side channels: model GZ, section 46x80 mm, in extruded aluminium, onto which the drive blocks are mounted at one end, and an adjustable pulley at the other.
• Moving rails: mod. FZ, horizontal bars in extruded aluminium (one roughly every 70 cm) designed to support large blind widths into which the fabric strips are inserted. The first rail is connected to a draw-plate attached to the moving chain. The other rails, connected to one another by the fabric strips, slide along the guide rails and are pulled or pushed by the first rail until they reach the stop position.
• Tensioning roller: Ø 78 mm 1.25 mm thickness zinc plated steel tube mounted next to the motor, onto which the last fabric strip is mounted with the purpose of hiding the motor for aesthetical reasons. The fabric tension is adjusted manually during the installation.
  
• Double shafted motor (series JA, single phase 230V-50Hz, adjustable range 85 turns, with thermal cut-out, integrated limit switches and IP44 water protection) mounted on an aluminium spindle that is connected to a pinion that moves a chain and steel cable inside the side channels.
  
  - Nominal couple: 10 Nm
  - Operating speed: 7 Cm/s
  - Voltage: 230V-50Hz
  - Current: 0.53 A
  - Maximum weight lifted: 40 Kg
  
  
  

OPTIONALS:

• Remote control, electronic control units for multi-level automation, sun/wind sensors
• Ceiling mounting with use of special brackets 40x60 mm
  

ADVANTAGES:

• Ideal system for outdoor applications that may be installed on any structure
• Heavy-duty aluminium structure suitable for large dimensions, up to W 500 x H 1100 cm
• Robust and resilient system