 |
HORIZONTAL SYSTEMS - WINTERMEETING |
|
 |
| Type of application: |
| Horizontal, Slanted or Vertical |
| Installation: |
| Indoors only |
|
Product marked:

(only motorised versions) |
|
The Wintermeeting is the ideal system for installation on any type of structure and may be adapted for vertical, slanted, horizontal or curved surfaces. Suitable for indoor applications only.
Manual (crank) or motorised (230V / 50Hz) operation. The blind is available in the following standard colours: anodised silver or powder enamelled RAL 9010 (white).

Lightweight structure consisting of:
- Extruded aluminium side channels containing the drive belt.
- Extruded aluminium moving rails, Ø 21 mm: the first rail is connected to a drag plate fixed to the drive belt; the other rails, connected one to another by the fabric, slide along the side channels and are dragged or pushed by the first bar.
- Extruded aluminium cover box in which the motor is hidden (motorised version).
- Manual version: a gear box mounted on one of the end blocks connected by a shaft to a pinion in the other end block that moves a toothed belt inside the aluminium guide rails.
- Motorised version: a double shafted motor mounted on an aluminium spindle which is connected to a pinion that moves a toothed belt inside the aluminium guide rails. Double shafted electrical motor series JA, single phase 230V-50Hz, adjustable range 85 turns, with thermal cut-out, integrated limit switches and IP44 water protection
- Nominal couple: 6 Nm
- Operating speed: 7 cm/s
- Voltage 230V-50Hz
OPTIONALS:
- Remote control, electronic control units for multi-level automation
- Central opening (for horizontal applications)
- Chain to maintain constant pitch between the moving rails
- Choice of fixing brackets : wall mounted with use of winged levers; wall mounted with suspended fabric (ideal for blackout solutions); ceiling or face mounted with use of L brackets
ADVANTAGES:
- Small, lightweight aluminium profiles, easy to mount on the window frame
- Total flexibility in the type of installation (slanted, curved, central opening etc)
- Driven by toothed belt: the blind may be stopped in any position
- Maximum dimensions W 200 x H 600 cm
|
|
 |
Standard structure
Motorised or manual operation
|
|
| References for this product family: |
|
|
|