APPLICATION: Vertical
INSTALLATION: Internal

Among its guided roller blinds, Resstende presents its B Series of studded roller blinds. The main feature that differentiates these products from other models is their dual function: to hold the fabric thanks to buttons/studs and, at the same time, to close the lateral spaces to avoid blade of lights if the curtain has a darkening function. Suitable only for small to medium-sized curtains (up to L 250 cm; for internal curtains).

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Indoor, small and medium-sized curtains
HEADBOX: C55 / CT55 made of extruded aluminum with rear cover. Pairs of self-supporting PVC side heads inside the rail.
ROLLER TUBE: Ø 30 mm extruded aluminum roller with ogive to facilitate the insertion/reassembly of the cloth
SIDE CHANNELS: G39 / GAF39 made extruded aluminum with a dual function of holding the fabric through plastic buttons and closing the side spaces to avoid the blades of light in the case of darkening curtains
HEM BAR: FG42 plate made of extruded aluminum with PVC slides, complete with a latch and featuring hook and pull cord
COLOUR: thermo-lacquered white RAL 9010, Anodized silver
OPERATION: spring Ø 30 mm, C98 harmonic wire without stop
INSTALLATION: front, side
SIZES: L minimum 44 cm – Max 160 x 180 cm

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Internal
HEADBOX: C55 / CT55 made of extruded aluminum with rear cover. Pairs of self-supporting PVC side heads inside the rail.
ROLLER TUBE: roller Ø 30 mm made of extruded aluminum with ogive to facilitate the insertion/reassembly of the cloth. PVC clutch control complete with cover on the opposite side and re-entering pin to facilitate the disassembly of the roller from the box
SIDE CHANNELS: G39 / GAF39 made of extruded aluminum with a dual function of holding the fabric through plastic buttons and closing the side spaces to avoid the blades of light in the case of darkening curtains
BACK: FP33 made of extruded aluminum with PVC sliding doors
COLOUR: thermo-lacquered white RAL 9010, Anodized silver
OPERATION: with step 6 nylon chain with Ø 4.5 mm PVC grains equipped with “child safety device” release
MOUNTING: front, side
SIZES: Min. L 60 cm – Max 160 x 180 cm

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Internal
HEADCASE: C55 / CT55 made of extruded aluminum with rear cover. Pairs of self-supporting PVC side heads inside the rail.
ROLLER TUBE: roller Ø 30 mm made of extruded aluminum with ogive to facilitate the insertion/reassembly of the cloth. PVC clutch control complete with cover on the opposite side and re-entering pin to facilitate the disassembly of the roller from the box
SIDE CHANNELS: G49 / GAF49 made of extruded aluminum with a dual function of holding the fabric through plastic buttons and closing the side spaces to avoid the blades of light in the case of darkening curtains
BACK: FG42 made of extruded aluminum with PVC sliding doors
COLOUR: thermo-lacquered white RAL 9010, Anodized silver – Anodized silver / black winch control rod
OPERATION: with Zamak gear ratio 1: 2.8 rpm with limit switch, complete with PVC rod stop and Ø 13 mm extruded aluminum tubular rod, jointed PVC-coated handle, joint applied directly to the gear
FIXING: front, side
SIZES: Min. L 80 cm – Max 180 x 210 cm

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Indoor, small / medium size curtains
HEADBOX: C63 made of extruded aluminum consisting of a fixed and a movable part that can be inspected. Pairs of self-supporting PVC side heads inside the rail
ROLLER TUBE: roller Ø 30 mm in extruded aluminum with ogive to facilitate insertion/reassembly of the sheet. Pairs of self-supporting PVC side heads directly into the rail
SIDE CHANNELS: G39 / GAF39 made of extruded aluminum with a dual function of holding the fabric through plastic buttons and closing the side spaces to avoid the blades of light in the case of darkening curtains
HEM BAR: extruded aluminum FG42 plate with PVC slides, complete with a latch with hook and pull cord
COLOUR: thermo-lacquered white RAL 9010, Anodized silver
OPERATION: Ø 30 mm spring, C98 harmonic wire without stop
MOUNTING: front, side
SIZES: L minimum 44 cm – Max 160 x 230 cm

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Internal
HEADBOX: C63 made of extruded aluminum consisting of a fixed and a movable part that can be inspected. Pairs of self-supporting PVC side heads inside the rail
ROLLER TUBE: Ø 30 mm extruded aluminum roller with ogive to facilitate the insertion/reassembly of the sheet. PVC friction control complete with cap on the opposite side and retractable pin to facilitate the disassembly of the roller from the box
SIDE CHANNELS: extruded aluminum G39 / GAF39 with a dual function of retaining the fabric with plastic buttons and closing the side spaces to avoid the blades of light in the case of a darkening curtain. On request, GT45 telescopic tracks for irregular walls or recessed systems
HEM BAR: extruded aluminum FP33 plate with sliding PVC caps
COLOUR: thermo-lacquered white RAL 9010, Anodized silver
OPERATION: with step 6 nylon chain with Ø 4.5 mm PVC grains equipped with “child safety device” release
MOUNTING: front, side
SIZES: Min. L 60 cm – Max 160 x 230 cm

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Internal
HEADBOX: C63 made of extruded aluminum consisting of a fixed and a movable part that can be inspected. Pairs of self-supporting PVC side heads inside the rail
ROLLER TUBE: Ø 30 mm extruded aluminum roller with ogive to facilitate the insertion/reassembly of the sheet. PVC friction control complete with cap on the opposite side with retractable pin to facilitate the disassembly of the roller from the box
SIDE CHANNELS: extruded aluminum G39 / GAF39 with a dual function of retaining the fabric with plastic buttons and closing the side spaces to avoid the blades of light in the case of a blackout curtain. On request, GT45 telescopic tracks for irregular walls or recessed systems
HEM BAR: extruded aluminum FG42 plate in with sliding PVC caps
COLOUR: thermo-lacquered white RAL 9010, Anodized silver
OPERATION: with step 6 nylon chain with Ø 4.5 mm PVC grains equipped with “child safety device” release
MOUNTING: front, side
SIZES: Min. L 60 cm – Max 180 x 230 cm

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Internal
HEADBOX: CT76 made of extruded aluminum with rear cover. Pairs of self-supporting PVC side heads inside the rail
ROLLER TUBE: Ø 39 mm extruded aluminum roller with ogive to facilitate the insertion/reassembly of the sheet. PVC EASY LOCK friction control complete with a cap on the opposite side with a retractable pin to facilitate the disassembly of the roller from the box
SIDE CHANNELS: lateral G39 / GAF39 made of extruded aluminum with a dual function of retaining the fabric with plastic buttons and closing the side spaces to avoid the blades of light in the case of a darkening curtain. On request, GT45 telescopic tracks for irregular walls or recessed systems
HEM BAR: extruded aluminum FG42 plate with sliding PVC caps
COLOUR: thermo-lacquered white RAL 9010, Anodized silver
OPERATION: with step 6 nylon chain with Ø 4.5 mm PVC grains equipped with “child safety device” release
MOUNTING: front, side
SIZES: Min. L 60 cm – Max 200 x 220 cm

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Internal
HEADBOX: CT76 made of extruded aluminum with rear cover. Pairs of self-supporting PVC side heads inside the rail
ROLLER TUBE: Ø 36 mm extruded aluminum roller with ogive to facilitate the maintenance of the fabric
SIDE CHANNELS: G49 / GAF49 made of extruded aluminum with a dual function of retaining the fabric with plastic buttons and closing the side spaces to avoid the blades of light in the case of a darkening curtain. On request, GT45 telescopic tracks for irregular walls or recessed systems
HEM BAR: extruded aluminum FG42 plate with sliding PVC caps
COLOUR: thermo-lacquered white RAL 9010, Anodized silver – anodized Silver / Black removable winch control rod
OPERATION: with Zamak gear ratio 1: 2.8 rpm with limit switch, complete with PVC rod stop and Ø 13 mm extruded aluminum tubular rod, jointed PVC-coated handle, joint applied directly to the gear
MOUNTING: front, side
SIZES: Min. L 80 cm – Max 220 x 220 cm

CHARACTERISTICS:

APPLICATION: Vertical
INSTALLATION: Internal
HEADBOX: CT76 made of extruded aluminum with rear cover. Pairs of self-supporting PVC side heads inside the rail
ROLLER TUBE: Ø 40 mm extruded aluminum roll
SIDE CHANNELS: G49 / GAF49 made of extruded aluminum with a dual function of retaining the fabric with plastic buttons and closing the side spaces to avoid the blades of light in the case of a darkening curtain. On request, GT45 telescopic tracks for irregular walls or recessed systems
HEM BAR: extruded aluminum FG42 plate with sliding PVC caps
COLOUR: thermo-lacquered white RAL 9010, Anodized silver
OPERATION: single-phase tubular motor 230V / 50 Hz M40 with limit switch adjustment, thermal protection, IP44 protection index
MOUNTING: front, side
SIZES: Min. L 80 cm – Max 220 x 220 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: internal
BOX: C90 / CT90 made extruded aluminum consisting of a fixed and a movable part that can be inspected; pairs of aluminum end caps painted in the same color as the box. Heads for side attachment are provided as a supplement
ROLLER TUBE: Ø 49 mm extruded aluminum with ogive to facilitate the insertion and reassembly of the cloth
SIDE CHANNELS: G39 / GAF39 made of extruded aluminum with a dual function of retaining the fabric with plastic buttons and closing the side spaces to avoid the blades of light in the case of a darkening curtain
HEM BAR: FG42 flat in extruded aluminum with sliding PVC caps
MANEUVER: chain combined with EASY LOCK PVC friction control complete with a cap on the opposite side and retractable pin to facilitate the disassembly of the roller from the brackets and return spring to facilitate the lifting of the fabric. Step 6 nylon chain with Ø 4.5 mm PVC grains equipped with “child safety device” release according to the UNI EN13120: 2014 standard
FIXING: front, side or ceiling. As a supplement, lateral fixing of the box
DIMENSIONS: Min. L 80 cm – Max 240 x H 280 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: internal
HEADBOX: C90 / CT90 made of extruded aluminum consisting of a fixed and a movable part that can be inspected; pairs of aluminum end caps painted in the same color as the box. Heads for side attachment as a supplement.
ROLLER TUBE: Ø 42 mm in extruded aluminum with ogive to facilitate the insertion and reassembly of the sheet
SIDE CHANNELS: G49 / GAF49 made of extruded aluminum with a dual function of retaining the fabric with plastic buttons and closing the side spaces to avoid the blades of light in the case of a darkening curtain
HEM BAR: FG42 flat in extruded aluminum with sliding PVC caps
OPERATION: with Zamak winch, 1: 3.3 rpm ratio with limit switch. Ø 13 mm extruded aluminum tubular rod, removable with magnetic attachment; joined PVC-coated handle, joint applied directly to the winch, PVC rod stop
MOUNTING: front, side or ceiling. As a supplement, lateral fixing of the box
SIZES: Min. L 80 cm – Max 260 x H 300 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: internal
HEADBOX: C90 / CT90 made of extruded aluminum consisting of a fixed and a movable part that can be inspected; pairs of aluminum end caps painted in the same color as the box. Heads for side attachment are provided as a supplement
ROLLER TUBE: Ø 49 mm extruded aluminum with ogive to facilitate the insertion/reassembly of the sheet
SIDE CHANNELS: G49 / GAF49 made of extruded aluminum with a dual function of retaining the fabric through plastic buttons and closing the lateral spaces to avoid the blades of light if the curtain has a darkening function
HEM BAR: FG42 flat made of extruded aluminum with sliding PVC caps
OPERATION: single-phase tubular motor 230V / 50Hz M40 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included
MOUNTING: front, side or ceiling. As a supplement, lateral fixing of the box
SIZES: Min. L 80 cm – Max 260 x H 300 cm

Enter your email to download the catalog!
In relation to the Privacy Policy (GDPR – EU Regulation no. 679 of 2016), I/we express consent to the processing of my/our personal data by your company, for the purposes related to the business activities. Under no circumstances may the data be disclosed to others for uses other than those inherent in the rapport with RESSTENDE. I/we also express consent to the processing of my/our personal data being conducted with electronic and/or automated means able to connect the data to those of other subjects, based on qualitative, quantitative and temporal criteria, recurring or definable on a case-by-case basis. I/we also express consent to the processing of my/our personal data by companies, entities or consortia that provide specific processing services or carry out activities functional to that of the company, as well as to subjects to whom the right to access my/our personal data is recognised by the provisions of the law or of secondary or community legislation.
Enter your email to download the catalog!
In relation to the Privacy Policy (GDPR – EU Regulation no. 679 of 2016), I/we express consent to the processing of my/our personal data by your company, for the purposes related to the business activities. Under no circumstances may the data be disclosed to others for uses other than those inherent in the rapport with RESSTENDE. I/we also express consent to the processing of my/our personal data being conducted with electronic and/or automated means able to connect the data to those of other subjects, based on qualitative, quantitative and temporal criteria, recurring or definable on a case-by-case basis. I/we also express consent to the processing of my/our personal data by companies, entities or consortia that provide specific processing services or carry out activities functional to that of the company, as well as to subjects to whom the right to access my/our personal data is recognised by the provisions of the law or of secondary or community legislation.