APPLICATION: Vertical
INSTALLATION: Indoors/Outdoors
WIND RESISTANCE: Class 2-3
Roller blinds with AISI 316/304 stainless steel cable tracks, specially designed for outdoor applications. A series of refined awnings, with or without headbox, including cables and stainless steel tensioner or fixing brackets; possibility of frontal or floor mounting.
Available in manual version with winch or motorized.
PRODUCT MARKED EN 13561 CLASS 2 EN 13561 CLASS 3 
CHARACTERISTICS
Application: vertical
Installation: outdoor
Headbox: C105/CT105 extruded aluminium headbox with removable cover and aluminium end cheeks
Roller tube: Ø 78 mm galvanized steel
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD42 extruded aluminum hem bar, ballasted internally with galvanized iron profile, complete with white or black POM endcaps with eyelets for sliding in the guides
Operation:TS gear box ratio 1:9 in zama without endstop. Ø 13 mm removable aluminium crank rod with magnetic coupling, PVC coated jointed handle and PVC clip
Upper mounting: ceiling mounting. Supplement for wall mounting with iron “L” brackets in the same colour as the headbox or end cheeks for side mounting
Lower mounting:stainless steel cable tensioning unit for floor mounting or stainless steel AISI 316 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: outdoor
Headbox: C105/CT105 extruded aluminum headbox with removable cover and powder coated aluminum end cheeks. On supplement end cheeks for side mounting
Roller tube: Ø 60 mm extruded aluminum tube or Ø 78 mm galvanized steel tube with slot to facilitate fabric removal
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD42 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: motorised operation; 230V/50Hz tubolar motor M50, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: ceiling mounting. Supplement for lateral mounting or wall mounting with steel powder coated “L” brackets
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: outdoor
Headbox: C104 extruded aluminum headbox with removable cover and aluminum end cheeks. On supplement end cheeks for side mounting
Roller tube: Ø 78 mm galvanized steel tube with slot to facilitate fabric removal
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD42 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: TS gear box ratio 1:9 in zama without endstop. Ø 13 mm removable aluminum crank rod with magnetic coupling, PVC coated jointed handle and PVC clip
Upper mounting: ceiling mounting with hidden brackets. Supplement for lateral mounting or wall mounting with steel powder coated “L” brackets
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: outdoor
Headbox: C104 extruded aluminum headbox with removable cover and powder coated aluminum end cheeks. On supplement end cheeks for side mounting
Roller tube: Ø 60 extruded aluminum tube or Ø 78 mm galvanized steel tube with slot
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD42 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: motorised operation; 230V/50Hz M50 tubolar motor, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: ceiling mounting with hidden brackets. Supplement for lateral mounting or wall mounting with steel powder coated “L” brackets
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: outdoor
Headbox: C124 extruded aluminum headbox with two removable covers and aluminum end cheeks. The headbox allows to hide the tube including hem bar when shade is completely wrapped. On supplement end cheeks for side mounting
Roller tube: Ø 60 extruded aluminum tube or Ø 78 mm galvanized steel tube with slot
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FZ47 retractable extruded aluminum weighted flat hem bar with POM end caps and brush
Operation: motorised operation; 230V/50Hz tubolar motor M50, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: ceiling mounting with hidden brackets. Supplement for lateral mounting or wall mounting with steel powder coated “L” brackets
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: indoor/outdoor
Headbox: C90/CT90 extruded aluminum headbox with removable cover and aluminum end cheeks. On supplement end cheeks for side mounting
Roller tube: Ø 42/49 mm extruded aluminum tube with slot
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD35 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: crank operation, gear box ratio 1:3.3 in zama with endstop.
Ø 13 mm removable aluminum crank rod with magnetic coupling, PVC coated jointed handle and PVC clip
Upper mounting: ceiling mounting. Supplement for lateral mounting or wall mounting with steel powder coated “L” brackets
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: indoors/outdoor
Headbox: C90/CT90 extruded aluminum headbox with removable cover and powder coated aluminum end cheeks. On supplement end cheeks for side mounting
Roller tube: Ø 44/60 mm extruded aluminum tube
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD35 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: motorised operation; 230V/50Hz tubolar motor M40/M50, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: ceiling mounting. Supplement for lateral mounting or wall mounting with steel powder coated “L” brackets
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: indoor/outdoor
Headbox: C91 extruded aluminum headbox with removable cover and aluminum end cheeks. On supplement end cheeks for side mounting
Roller tube: Ø 42/49 mm extruded aluminum tube with slot
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD35 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: crank operation, gear box ratio 1:3.3 in zama with endstop.
Ø 13 mm removable aluminum crank rod with magnetic coupling, PVC coated jointed handle and PVC clip
Upper mounting: ceiling mounting with hidden brackets. Supplement for lateral mounting or wall mounting with steel powder coated “L” brackets
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: indoors/outdoor
Headbox: C91 extruded aluminum headbox with removable cover and powder coated aluminum end cheeks. On supplement end cheeks for side mounting
Roller tube: Ø 44/60 mm extruded aluminum tube
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD35 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: motorised operation; 230V/50Hz M40/M50 tubolar motor, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: ceiling mounting with hidden brackets. Supplement for lateral mounting or wall mounting with steel powder coated “L” brackets
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: indoor/outdoor
Headbox: squared C106 extruded aluminium headbox with two fixed covers and one removable cover, examinable from below
Roller tube: Ø 44/60 mm extruded aluminum
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Retractable Hem bar: FZ37 extruded aluminum hem bar, ballasted internally with galvanized iron profile, complete with white or black PVC endcaps with eyelets for sliding in the guides
Operation:motorised operation; 230V/50Hz M50 tubolar motor, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: ceiling mounting. Supplement for wall mounting with iron “L” brackets in the same colour as the headbox or end cheeks for side mounting
Lower mounting: stainless steel cable tensioning unit for fl oor mounting or stainless steel AISI 316 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: indoors/outdoors
Headbox: squared C160 extruded aluminium headbox with two fixed covers and one removable cover, examinable from below
Roller tube: Ø 78/85 mm galvanized steel / Ø 110 mm extruded aluminium
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Retractable Hem bar: FZ47V extruded aluminum hem bar, ballasted internally with galvanized iron profile, complete with white or black PVC endcaps with eyelets for sliding in the guides
Operation: motorised operation; 230V/50Hz M50 tubolar motor, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: directly to the ceiling through a direct fixation of the headbox. Supplement for wall mounting with iron “L” brackets in the same colour as the headbox or end cheeks for side mounting
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 316 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: indoor/outdoors. Specially designed for an extreme adaptability during installation. The position of the mounting brackets and the distance between the wall and the cable guides may be adjusted on site, hence eliminating problems of slanted ceilings/walls
Brackets: 80×92 mm steel powder coated brackets and interior plates with PVC covers (white, grey, black). The angle of the interior plate can be adjusted at intervals of 22° to distance the cable from the wall
Roller tube: Ø 60 mm extruded aluminium tube with slot
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD35 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: motorised operation; 230V/50Hz tubolar motor M50, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: wall or ceiling
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: indoor/outdoors. Specially designed for an extreme adaptability during installation. The position of the mounting brackets and the distance between the wall and the cable guides may be adjusted on site, hence eliminating problems of slanted ceilings/walls
Brackets: 80×92 mm steel powder coated brackets and interior plates with PVC covers (white, grey, black). The angle of the interior plate can be adjusted at intervals of 22° to distance the cable from the wall
Roller tube: Ø 42/49 mm extruded aluminum tube with slot
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD35 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: winch operation; gear box ratio 1:3.3 in zama with endstop,
Ø 13 mm removable aluminium crank rod with magnetic coupling, PVC coated jointed handle and PVC wall clip
Upper mounting: wall or ceiling
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: outdoors. Specially designed for an extreme adaptability during installation. The position of the mounting brackets and the distance between the wall and the cable guides may be adjusted on site, hence eliminating problems of slanted ceilings/walls
Brackets: 110×120 mm steel powder coated brackets and interior plates with PVC covers (white, grey, black). The angle of the interior plate can be adjusted at intervals of 22° to distance the cable from the wall. Supplement for AISI 304 stainless steel brackets
Roller tube: Ø 78/85 mm galvanized steel tube with slot to facilitate fabric removal
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD42 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: motorised operation; 230V/50Hz tubolar motor M50, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: wall or ceiling
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: outdoors. Specially designed for an extreme adaptability during installation. The position of the mounting brackets and the distance between the wall and the cable guides may be adjusted on site, hence eliminating problems of slanted ceilings/walls
Brackets: 110×120 mm steel powder coated brackets and interior plates with PVC covers (white, grey, black). The angle of the interior plate can be adjusted at intervals of 22° to distance the cable from the wall.Supplement for AISI 304 stainless steel brackets
Roller tube: Ø 78/85 mm galvanized steel tube with slot
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD42 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: winch operation; gear box ratio 1:9 in zama without endstop, Ø 13 mm removable aluminium crank rod with magnetic coupling, PVC coated jointed handle and PVC wall clip
Upper mounting: wall or ceiling
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
CHARACTERISTICS
Application: vertical
Installation: outdoors
Brackets: 120×130 mm steel powder coated brackets
Roller tube: Ø 78/85 mm galvanized steel tube with slot to facilitate fabric removal
Side channels: Ø 4 mm, 19 strand stainless steel (AISI 316) wire cable guides
Hem bar: FD42 round extruded aluminium bottom rail with internal galvanized steel weight and POM end caps
Operation: motorised operation; 230V/50Hz tubolar motor M50, with top/bottom limit switches and mains cable, thermal cut-out and class IP44 water resistance
Upper mounting: wall or ceiling
Lower mounting: stainless steel cable tensioning unit for floor mounting or stainless steel AISI 304 brackets for wall/window frame mounting
REFERENCES
