RESSTENDE offers a broad selection of extruded aluminium side channels (in a variety of shapes and sizes) as well as a selection of bars and cables in stainless steel or nylon, to hold the sliding surface of the panel in the desired position.

The choice of the most suitable side channels is made on the basis of the side channel system required, the type and size of the shade.

SIDE CHANNEL SYSTEM:

The panel is not fitted inside the side channel – only the hem bar slides into the side channel, thus keeping the sliding surface of the panel in the desired position:

L1 SERIES – stainless steel cable side channels

L3 SERIES – extruded aluminium side channels

The fabric is fitted inside the side channel – extruded aluminium side channels with dual function, securing the fabric and closing the lateral spaces in order to prevent blades of light for shades with a blackout function:

SERIES B – studded panel with plastic rivets

R SERIES – horizontal steel rods inserted in pockets welded into the fabric

S SERIES – zip system

G39

Side channel dimensions 23 x 39 mm for front/lateral mounting. They retain the fabric (with plastic buttons) and close the lateral spaces to avoid any blades of light. Series B, only for spring, chain or motor systems.

G49

Side channels dimensions 23 x 49 mm for lateral mounting. In Series B, they retain the fabric (with plastic buttons) and close the lateral spaces to avoid any blades of light. In the DB Series models with double headbox, they contain the studded fabric during sliding and accommodate the drive belts. For winch or motorised systems only.

GAF39

Side channel dimensions 21 x 39 mm for front/lateral mounting. They retain the fabric (with plastic buttons) and close the lateral spaces to avoid any blades of light. Series B with spring, chain or motor operation.

GAF49

Side channel dimensions 21 x 49 mm for front/lateral mounting. They retain the fabric (with plastic buttons) and close the lateral spaces to avoid any blades of light. Series B with winch and motor operation.

G30

Side channels are only available for the L3 Series Windproof model, with dimensions of 28 x 30 mm. Motor-operated.

G31

Side channel dimensions 24 x 31 mm for lateral mounting. The L3 Series is for panels out of the side channel, for winch or motor systems.

GT45

Telescopic side channels, dimensions 42 x 17 mm. Side mounting. Only for spring, chain, winch or motor systems up to maximum width of 220 cm. Ideal for irregular-shaped walls or embedded systems.

G80

Side channels with dimensions 24 x 80 mm, including the brush. Lateral or frontal mounting. R Series with the rodded fabric inserted in a side channel, DR Series and insect screens.

GC20

Side channels with dimensions 33 x 19 mm. Side mounting. L3 series for panels without side channel. For winch or motorised systems only.

GP32

Side channels for façade sunshades: Vegas and Proiezione, dimensions 38 x 32 mm. Lateral or frontal mounting with fabric external to the side channel and variable bracket height.

GP42

Round side channels, dimensions 40 x 44 mm. For front mounting only. Vegas and Proiezione model façade sunshades, with free-hanging fabric. 

GP42D

Double side channels dimensions 39 x 44 mm, for use with multiple modules. On request for façade sunshades, the Vegas and Projection models. Frontal mounting with variable bracket length.

GS40

Side channels, dimensions 42 x 39 mm. Closure profile in aluminium and internal core with PVC fins for the perfect sliding and hold of the fabric in the side channel. Total blackout where requested. For ZIP Systems, DZ Series and Insect Screens. For winch or motor operation.

GS65

Side channels, dimensions 65 x 42 mm. Closure profile in aluminium and internal core with PVC fins for the perfect sliding and hold of the fabric in the side channel. Total blackout where requested. Front/side mounting. For ZIP Systems and Insect Screens. For winch or motor operation.

GS39 – ON REQUEST

Side channels, dimensions 39 x 25 mm. Closure profile in aluminium and internal core with PVC fins for the perfect sliding and hold of the fabric in the side channel. Front/side mounting. Total blackout where requested. Chain, motor or winch operation. For ZIP Systems and Insect Screens.

GVS

Side channels only for Veranda, profile 65 x 65 mm. Choice of brackets for mounting on various structure types.

GM32

Side channels only for Orizzonti, dimensions 23 x 32 mm. Motor-operated.

PERLON

Nylon cable Ø 1.2 or 3 mm, for small-sized sunshades. For indoor applications.

STAINLESS STEEL CABLE

Stainless steel cable Ø 1 or 2.5 mm. For small indoor and outdoor applications.

CABLES IN STAINLESS STEEL

19 wire Ø 4 mm stainless-steel cable complete with cable tensioning cylinder or fork tensioner and accessories in AISI 316 stainless steel. 19 stainless-steel cable wires Ø 6 mm only for Veranda with Cables.

TONDO INOX

Stainless steel bar Ø 8/10 mm for external applications with CT110/CT135 headbox.

The standard colours are: white, silver and black. RAL colours in epoxy powder are available on request.

PLEASE NOTE:

With G80-type side channels, it is mandatory to use a panel with rods. In the other cases, in order to add reinforce the panel, adding rods may be required in outdoor realisations. The horizontal reinforcement RODS, in Ø 4.5 mm galvanised steel, are inserted in special pockets welded into the panel approximately every 90 cm.

Contact us for more information