APPLICATION: vertical
INSTALLATION: outdoors – on curtain walls

FAÇADE BLINDS are exquisite systems featuring exclusive design and high technical content, specifically designed for external applications on curtain walls. All these refined systems are made of round headboxes and cable tracks or stainless-steel rods and special fixing brackets: awnings become an integral part of the building’s architecture

PRODUCT BRANDED FOR 50% TAX DEDUCTION  

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: outdoors, on curtain walls
HEADBOX: round CT110 made of extruded aluminum. Painted aluminum end caps with slide system for quick assembly of the structure on the additional fixing brackets
ROLLER TUBE: extruded aluminum Ø 60 mm or galvanized steel Ø 78 mm, with ogive to facilitate the insertion and reassembly of the sheet
SIDE CHANNELS: AISI 316 stainless steel (rods Ø 8 mm or, on request, cables Ø 4 mm, 19 wires)
HEM BAR: round FD42 made of extruded aluminum, suitably ballasted with galvanized iron profile and equipped with POM side caps with eyelets for sliding into the rail
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included.
UPPER MOUNTING: with standard brackets in AISI 316 stainless steel, on the wall or ceiling, available at an additional cost
BOTTOM MOUNTING: on the floor with fork and eyelet or on request with cable tensioning cylinder, both in AISI 316 stainless steel.
SIZES
With roller Ø 60 Min. L 100 cm x H 140 cm – Max L 250 x H 400 cm
With roller Ø 78 Min. L 260 cm x H 140 cm – Max L 400 x H 300 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: external
HEADBOX: round CT135 made extruded aluminum, consisting of a fixed and a movable part that can be inspected for awning maintenance. Painted aluminum end caps with slide system for quick assembly of the structure on the additional fixing brackets.
ROLLER TUBE: galvanized steel Ø 78/85 mm with ogive to facilitate the fabric’s maintenance
Guides: AISI 316 stainless steel (Ø 8 mm rods or, on request, Ø 4 mm cables, 19 wires)
HEM BAR: round FD42 made of extruded aluminum, suitably ballasted with galvanized iron profile and equipped with POM side caps with eyelets for sliding into the rail
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included.
TOP MOUNTING: with standard brackets in AISI 316 stainless steel, on the wall or ceiling, available on request and at an additional cost
BOTTOM MOUNTING: on the floor with fork and eyelet or on request with cable tensioning cylinder, both made of AISI 316 stainless steel.
SIZES:
With roller Ø 78 Min. L 100 cm x H 140 cm – Max L 400 x H 440 cm
With roller Ø 85 Min. L 410 cm x H 140 cm – Max L 450 x H 440 cm

APPLICATION: vertical
INSTALLATION: outdoors, on curtain walls
HEADBOX: round CT110 made of extruded aluminum. Die-cast side heads made of painted aluminum, designed for hooking the tracks into a special cup containing the compensation spring
ROLLER TUBE: extruded aluminum Ø 60 mm or galvanized steel Ø 78 mm, with ogive to facilitate the insertion and reassembly of the sheet
SIDE CHANNELS: AISI 316 stainless steel (Ø 8 mm rods or Ø 4 mm cables, 19 wires)
HEM BAR: round FD42 made of extruded aluminum, suitably ballasted with galvanized iron profile and equipped with POM side caps with eyelets for sliding into the rail
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included
UPPER MOUNTING: on the wall with die-cast aluminum brackets complete with blocks or special “L” brackets
LOWER MOUNTING: Die-cast aluminum brackets complete with blocks or special “L” brackets suitable for front fixing. On request, fixing to the floor with fork and eyelet or with cable tensioning cylinder, both in AISI 316 stainless steel
SIZES:
With roller Ø 60 Min. L 100 cm x H 140 cm – Max L 250 x H 400 cm
With roller Ø 78 Min. L 260 cm x H 140 cm – Max L 400 x H 300 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: outdoors, on curtain walls
HEADBOX: round CT110 made of extruded aluminum. Painted aluminum end caps with slide system for quick assembly of the structure on the additional fixing brackets
ROLLER TUBE: extruded aluminum Ø 60 mm or galvanized steel Ø 78 mm, with ogive to facilitate the insertion and reassembly of the sheet
SIDE CHANNELS: AISI 316 stainless steel (Ø 8 mm rods or, on request, Ø 4 mm cables, 19 wires)
HEM BAR: round FD42 made extruded aluminum, suitably ballasted with galvanized iron profile, and equipped with POM side caps with eyelets for sliding into the rail
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and protection index against water splashes IP44. Switch excluded
UPPER MOUNTING: with AISI 316 stainless steel standard brackets on the wall or ceiling, available at an additional cost
BOTTOM MOUNTING: on the floor with fork and eyelet or on request with cable tensioning cylinder, both made of AISI 316 stainless steel.
SIZES:
With roller Ø 60 Min. L 100 cm x H 140 cm – Max L 250 x H 400 cm
With roller Ø 78 Min. L 260 cm x H 140 cm – Max L 400 x H 300 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: outdoors, on curtain walls
BOX: round CT135 made extruded aluminum, consisting of a fixed and a movable part that can be inspected for awning maintenance. AISI 316 stainless steel end caps with a satin finish, complete with clamp flanges for structural support of the awning on the tracks
ROLLER TUBE: galvanized steel Ø 78/85 mm with ogive to facilitate the maintenance of the fabric
SIDE CHANNELS: AISI 316 stainless steel Ø 10 mm rods
HEM BAR: round FD42 made of extruded aluminum, suitably ballasted with galvanized iron profile and equipped with POM side caps with eyelets for sliding into the rail
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included
MOUNTING: Standard AISI 304 stainless steel anchoring brackets act as tie rods, suitable for front or ceiling/floor fixing, at an additional cost. On request, we manufacture custom brackets
SIZES:
With roller Ø 78 Min. L 100 cm x H 140 cm – Max L 400 x H 440 cm
With roller Ø 85 Min. L 410 cm x H 140 cm – Max L 450 x H 440 cm

Brackets not included

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: outdoors, on curtain walls
HEADBOX: round CT110 made of extruded aluminum. Pair of painted aluminum side heads designed for snap-in fixing into the rail
ROLLER TUBE: galvanized steel Ø 78 mm, with ogive to facilitate the insertion and reassembly of the sheet
SIDE CHANNELS: GP32 made of extruded aluminum for side or front fixing. Out-track awning. Projection system with extruded aluminum horizontal crosspiece, in-track sliders with self-adjusting runners
HEM BAR: round FD42 made extruded aluminum, suitably ballasted and fixed on jointed arms that allow rotation up to 160 °. 600-mm long protruding arms are with stainless steel thrust spring. The whole system automatically locks up and down when the arms start to protrude, and the stop point can be set at any height.
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included
MOUNTING: side or front. Front fixing also through brackets of variable length (from 5 to 20 cm) as a supplement
SIZES: Min. L 80 cm x H 100 cm – Max L 250 x H 300 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: outdoors, on curtain walls
HEADBOX: round CT135 made extruded aluminum, consisting of a fixed and a movable part that can be inspected for awning maintenance. A pair of painted aluminum side heads, designed for snap-in fixing into the rail
ROLLER TUBE: galvanized steel Ø 78 mm, with ogive to facilitate the sheet insertion and reassembly
SIDE CHANNELS: GP32 made of extruded aluminum for side or front fixing. Out-track awning. Projection system with an extruded aluminum horizontal crosspiece, in- track sliders with self-adjusting runners
HEM BAR: round FD42 made extruded aluminum, suitably ballasted and fixed on jointed arms that allow rotation up to 160 °. 600-mm long protruding arms are with stainless steel thrust spring. The whole system automatically locks up and down when the arms start to protrude, and the stop point can be set at any height.
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included
MOUNTING: side (with GP32), front (GP32 / GP42). Front fixing also by means of brackets of variable length (from 5 to 20 cm) as a supplement
SIZES: Min. L 80 cm x H 100 cm – Max L 250 x H 420 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: outdoors, on curtain walls
HEADBOX: round CT110 made of extruded aluminum. Pair of painted aluminum side heads, self-supporting on tracks
ROLLER TUBE: extruded aluminum Ø 60 mm or galvanized steel Ø 78 mm, with ogive to facilitate the sheet insertion and reassembly
SIDE CHANNELS: GP32 made of extruded aluminum for side or front fixing. Out-track awning.
HEM BAR: round FD42 made of extruded aluminum suitably ballasted with galvanized iron profile and equipped with telescopic side caps for sliding onto the rail
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included
MOUNTING: side or front. Front fixing also through brackets of variable length (from 5 to 20 cm) as a supplement
SIZES:
With roller Ø 60 Min. L 100 cm x H 140 cm – Max L 250 x H 400 cm
With roller Ø 78 Min. L 260 cm x H 140 cm – Max L 400 x H 300 cm

CHARACTERISTICS:

APPLICATION: vertical
INSTALLATION: outdoors, on curtain walls
HEADBOX: round CT135 made of extruded aluminum, consisting of a fixed and a movable part that can be inspected for awning maintenance. Pair of painted aluminum side heads, self-supporting on tracks
ROLLER TUBE: galvanized steel Ø 78 or Ø 85 mm, with ogive to facilitate the insertion and reassembly of the sheet
SIDE CHANNELS: GP32 made of extruded aluminum for side or front fixing. Out-track awning.
HEM BAR: round FD42 made of extruded aluminum, suitably ballasted with galvanized iron profile and equipped with telescopic side caps for sliding on the rail
COLOUR: White RAL 9010, anodized silver
OPERATION: single-phase tubular motor 230V / 50Hz M50 with limit switch adjustment. Thermal protection and IP44 protection index against water splashes. Switch not included
MOUNTING: side or front. Front fixing also through brackets of variable length (from 5 to 20 cm) as a supplement
SIZES:
With roller Ø 78 Min. L 100 cm x H 140 cm – Max L 400 x H 440 cm
With roller Ø 85 Min. L 410 cm x H 140 cm – Max L 450 x H 440 cm

REFERENCES

CONTACT US FOR INFORMATION OR DOWNLOAD OUR COMPLETE CATALOGUE HERE
download