APPLICATION: Vertical
INSTALLATION: Internal or External
Roller insect screens with side channels and closing trim in aluminium and internal side channel in PVC with flaps for retaining the cloth with zip; with headbox; chain, winch or motor operation.
CHARACTERISTICS:
APPLICATION: Vertical
INSTALLATION: Internal, External
HEADBOX: C90/CT90 in extruded aluminium consisting of a fixed part and a movable part that can be inspected. Dual side end caps in aluminium, painted in the same colour as the headbox, self-supporting while in motion.
ROLLER TUBE: Ø 42 mm in ogive-free extruded aluminium to facilitate maintenance of the fabric
SIDE CHANNELS: GS40 in painted aluminium with edge banding and internal core with PVC tabs for sliding and retaining the side channel of the netting.
HEM BAR: flat FZ47 in extruded aluminium weighted with a galvanised iron profile, complete with PVC sliding shoes
COLOUR: Lacquered white RAL 9010, silver anodised – Removable winch handle in anodised silver/black
OPERATION: zamak winch with a 1:2.8 gear ratio and limit switch. Complete with Ø 13 mm tubular rod in extruded aluminium, removable with a magnetic attachment. Rotating handle with PVC-coated handle; joint applied to the winch, PVC rod holder.
MOUNTING: front, side
SIZES: Min. L 80 cm – Max L 220 x H 250 cm
CHARACTERISTICS:
APPLICATION: Vertical
INSTALLATION: Internal, External
HEADBOX: C90/CT90 in extruded aluminium consisting of a fixed part and a movable part that can be inspected. Dual side end caps in aluminium, painted in the same colour as the headbox, self-supporting while in motion.
ROLLER TUBE: Ø 60 mm in ogive-free extruded aluminium to facilitate maintenance of the fabric
SIDE CHANNELS: GS40 in extruded aluminium with edge banding and internal core with PVC tabs for sliding and retaining the side channel of the netting. ZIP-system side channels for excellent wind resistance
HEM BAR: flat FZ47 in extruded aluminium weighted with a galvanised iron profile, complete with PVC sliding shoes
COLOUR: Lacquered white RAL 9010, anodised silver
OPERATION: tubular motor 230V/50 Hz M40 with limit switch adjustment, thermal protection and protection index IP44.
MOUNTING: front, side
SIZES: Min. L 80 cm x H 100 cm – Max L 220 x H 240 cm
CHARACTERISTICS:
APPLICATION: Vertical
INSTALLATION: Internal, External
HEADBOX: C105/CT105 in extruded aluminium consisting of a fixed part and a movable part that can be inspected. Dual side end caps in aluminium, painted in the same colour as the headbox
ROLLER TUBE: Ø 42 mm roll in extruded aluminium or Ø 78 mm in galvanised steel with ogive to facilitate the maintenance of the fabric
SIDE CHANNELS: GS40 in extruded aluminium with edge banding and internal core with PVC tabs for sliding and retaining the side channel of the netting. ZIP-system side channels for excellent wind resistance
HEM BAR: flat FZ47 in extruded aluminium weighted with a galvanised iron profile, complete with PVC sliding shoes
COLOUR: Lacquered white RAL 9010, silver anodised – Removable winch handle in anodised silver/black
OPERATION: zamak winch with a 1:9 gear ratio without limit switch. Complete with Ø 13 mm tubular rod in extruded aluminium, removable with a magnetic attachment. Rotating handle with PVC-coated handle; joint applied to the winch, PVC rod holder.
MOUNTING: front, side
SIZES:
With roller Ø 42 mm Min. L 80 cm – Max L 250 x H 320 cm
With roller Ø 78 mm Min. L 80 cm – Max L 450 x H 360 cm
CHARACTERISTICS:
APPLICATION: Vertical
INSTALLATION: Internal, External
HEADBOX: C105/CT105 in extruded aluminium consisting of a fixed part and a movable part that can be inspected. Dual side end caps in aluminium, painted in the same colour as the headbox
ROLLER TUBE: Ø 60 mm roll in extruded aluminium or Ø 78 mm in galvanised steel with ogive to facilitate the maintenance of the fabric
SIDE CHANNELS: GS40 in extruded aluminium with edge banding and internal core with PVC tabs for sliding and retaining the side channel of the netting. ZIP-system side channels for excellent wind resistance
HEM BAR: flat FZ47 in extruded aluminium weighted with a galvanised iron profile, complete with PVC sliding shoes
COLOUR: Lacquered white RAL 9010, anodised silver
OPERATION: single-phase tubular motor 230V/50 Hz M40 (tube Ø 60 mm) or M50 (tube Ø 78 mm), with limit switch adjustment, thermal protection and IP44 protection index.
MOUNTING: front, side
SIZES:
With roller Ø 60 mm Min. L 100 cm – Max L 300 x H 400 cm
With roller Ø 78 mm Min. L 100 cm – Max L 450 x H 360 cm
CHARACTERISTICS:
APPLICATION: Vertical
INSTALLATION: Internal, External
HEADBOX: C105/CT105 in extruded aluminium consisting of a fixed part and a movable part that can be inspected. Dual side end caps in aluminium, painted in the same colour as the headbox
ROLLER TUBE: Ø 42 mm roll in extruded aluminium or Ø 78 mm in galvanised steel with ogive to facilitate the maintenance of the fabric
SIDE CHANNELS: GS65 in extruded aluminium with edge banding and internal core with PVC tabs for sliding and retaining the side channel of the netting. ZIP-system side channels for excellent wind resistance
HEM BAR: flat FZ47 in extruded aluminium weighted with a galvanised iron profile, complete with PVC sliding shoes
COLOUR: Lacquered white RAL 9010, silver anodised – Removable winch handle in anodised silver/black
OPERATION: zamak TS winch with a 1:9 gear ratio without limit switch. Complete with Ø 13 mm tubular rod in extruded aluminium, removable with a magnetic attachment. Rotating handle with PVC-coated handle; joint applied to the winch, PVC rod holder.
MOUNTING: front, side
SIZES:
With roller Ø 42 mm Min. L 100 cm – Max L 250 x H 360 cm
With roller Ø 78 mm Min. L 100 cm – Max L 450 x H 360 cm
CHARACTERISTICS:
APPLICATION: Vertical
INSTALLATION: Internal, External
HEADBOX: C105/CT105 in extruded aluminium consisting of a fixed part and a movable part that can be inspected. Dual side end caps in aluminium, painted in the same colour as the headbox
ROLLER TUBE: Ø 60 mm roll in extruded aluminium or Ø 78 mm in galvanised steel with ogive to facilitate the maintenance of the fabric
SIDE CHANNELS: GS65 in extruded aluminium with edge banding and internal core with PVC tabs for sliding and retaining the side channel of the netting. ZIP-system side channels for excellent wind resistance
HEM BAR: flat FZ47 in extruded aluminium weighted with a galvanised iron profile, complete with PVC sliding shoes
COLOUR: Lacquered white RAL 9010, anodised silver
OPERATION: single-phase tubular motor 230V/50 Hz M50 with limit switch adjustment, thermal protection and protection index IP44.
MOUNTING: front, side
SIZES:
With roller Ø 60 mm Min. L 100 cm x H 100 cm – Max L 300 x H 360 cm
With roller Ø 78 mm Min. L 310 cm x H 100 cm – Max L 450 x H 360 cm
